Garter Springs

Part Number![]() |
Outer ø![]() |
Wire ø | Inner ø Ring | Active Length | Preload | Material Code | Stock | |||
---|---|---|---|---|---|---|---|---|---|---|
Da | d | Di | F0 | Available | ||||||
[mm] | [mm] | [mm] | [mm] | [N] |
|
|||||
0G09-018-0350 | 2.77 | 0.46 | 27.84 | 88.9 | 2.38 | 1.4310 |
|
Details | ||
0G09-018-0700 | 2.77 | 0.46 | 56.14 | 177.8 | 2.38 | 1.4310 |
|
Details | ||
0G09-018-1400 | 2.77 | 0.46 | 112.7 | 355.6 | 2.38 | 1.4310 |
|
Details | ||
0G88-024-0700 | 4.76 | 0.61 | 55.99 | 177.8 | 3.22 | 1.4310 |
|
Details | ||
0G88-024-1400 | 4.76 | 0.61 | 112.58 | 355.6 | 3.22 | 1.4310 |
|
Details | ||
0G88-024-2600 | 4.76 | 0.61 | 209.6 | 665.4 | 3.22 | 1.4310 |
|
Details | ||
0G50-024-0700 | 6.35 | 0.61 | 55.99 | 177.8 | 3.06 | 1.4310 |
|
Details | ||
0G50-024-1400 | 6.35 | 0.61 | 112.58 | 355.6 | 3.06 | 1.4310 |
|
Details | ||
0G50-024-2600 | 6.35 | 0.61 | 209.6 | 665.4 | 3.06 | 1.4310 |
|
Details |
Our interlock garter springs are extension springs with the ends fastened together to form a ring. They are primarily used to maintain controlled pressure of a radial lip seal on a shaft and to compensate for lip wear, changes in volume or stiffness of the elastomer, and the effect of temperature changes and time.
Garter Spring Lengths
- available in a variety of standard lengths
- all standard lengths can be trimmed and assembled to meet your requirements
Garter Spring Applications
- Oil seals
- Small motor belts
- Electrical connectors