Gas Struts with Welded Ends
- Febrotec Search
- What should I do if the Gas Strut has lost pressure?
- Would you like help from Febrotec for the design of gas springs for flaps or doors?
- Can I return a supplied Gas Strut if the pressure is insufficient?
- Where is the test force of a Gas Strut measured?
- How does a Gas Strut work?
- What are the differences between Gas struts, Gas Pressure Dampers and Nitrogen Cylinders in our Gas Strut series?
- What is the service life of Gas Struts?
- What is the maximum permissible ambient temperature for Gas Struts?
- Safety Data Sheet and Installation Instructions for Gas Struts
- Can Gas Struts be pressurized?
Part Number | Rod ø | Tube ø | Length | Stroke | Eye ø | Initial Force | Replacement | Stock | |||
---|---|---|---|---|---|---|---|---|---|---|---|
R | T | L | St | B | F1 | Available | |||||
[mm] | [mm] | [mm] | [mm] | [mm] | [N] |
|
|||||
0GS-W10TCD0150 | 10 | 22 | 885 | 395 | 8.1 | 150 | Lift-O-Mat 095214 |
|
Details | ||
0GS-W10TCD0200 | 10 | 22 | 885 | 395 | 8.1 | 200 | Lift-O-Mat 095222 |
|
Details | ||
0GS-W10TCD0250 | 10 | 22 | 885 | 395 | 8.1 | 250 | Lift-O-Mat 095230 |
|
Details | ||
0GS-W10TCD0300 | 10 | 22 | 885 | 395 | 8.1 | 300 | Lift-O-Mat 095249 |
|
Details | ||
0GS-W10TCD0350 | 10 | 22 | 885 | 395 | 8.1 | 350 | Lift-O-Mat 095257 |
|
Details | ||
0GS-W10TCD0400 | 10 | 22 | 885 | 395 | 8.1 | 400 | Lift-O-Mat 095265 |
|
Details | ||
0GS-W10TCD0450 | 10 | 22 | 885 | 395 | 8.1 | 450 |
|
Details | |||
0GS-W10TCD0500 | 10 | 22 | 885 | 395 | 8.1 | 500 | Lift-O-Mat 095265 |
|
Details | ||
0GS-W10TCD0550 | 10 | 22 | 885 | 395 | 8.1 | 550 |
|
Details | |||
0GS-W10TCD0600 | 10 | 22 | 885 | 395 | 8.1 | 600 | Lift-O-Mat 095281 |
|
Details | ||
0GS-W10TCD0650 | 10 | 22 | 885 | 395 | 8.1 | 650 |
|
Details | |||
0GS-W10TCD0700 | 10 | 22 | 885 | 395 | 8.1 | 700 | Lift-O-Mat 085073 |
|
Details |
Our gas struts with welded ends are ready for use without additional end pieces.
Gas Strut Applications
- Furniture Industry
- Automotive