m-Struts®

Part Number | Rod ø | Tube ø | Length |
Stroke![]() |
Initial Force | Final Force | Material Code | Mounting Thread | Stock | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|
R | T | L | St | F1 | F2 | M | Available | |||||
[mm] | [mm] | [mm] | [mm] | [N] | [N] | [mm] |
|
|||||
0GS-MSCD-026-1057 | 12.7 | 31.75 | 188.98 | 25.4 | 782 | 1057 | V2A & Steel | 8 |
|
Details | ||
0GS-MSCD-026-1240 | 12.7 | 31.75 | 151.13 | 25.4 | 369 | 1240 | V2A & Steel | 8 |
|
Details | ||
0GS-MSCD-033-1069 | 12.7 | 31.75 | 158.75 | 33.02 | 446 | 1069 | V2A & Steel | 8 |
|
Details | ||
0GS-MSCD-039-1111 | 12.7 | 31.75 | 201.68 | 38.1 | 622 | 1111 | V2A & Steel | 8 |
|
Details | ||
0GS-MSCD-039-1072 | 12.7 | 31.75 | 166.37 | 40.64 | 236 | 1072 | V2A & Steel | 8 |
|
Details | ||
0GS-MSCD-041-2354 | 12.7 | 31.75 | 345.95 | 40.64 | 1075 | 2354 | V2A & Steel | 8 |
|
Details | ||
0GS-MSCD-043-2187 | 12.7 | 31.75 | 246.13 | 43.18 | 417 | 2187 | V2A & Steel | 8 |
|
Details | ||
0GS-MSBD-051-0076 | 9.53 | 31.75 | 176.53 | 50.8 | 35 | 76 | V2A | 6 |
|
Details | ||
0GS-MSBD-051-0116 | 9.53 | 31.75 | 214.38 | 50.8 | 85 | 116 | V2A | 6 |
|
Details | ||
0GS-MSBD-051-0173 | 9.53 | 31.75 | 253.7 | 50.8 | 133 | 173 | V2A | 6 |
|
Details | ||
0GS-MSBD-051-0280 | 9.53 | 31.75 | 294.89 | 50.8 | 200 | 280 | V2A | 6 |
|
Details | ||
0GS-MSE-051-0027 | 6 | 15 | 160 | 51 | 9 | 27 | Stahl/Steel | 6 |
|
Details |
m-Struts®
Our m-Struts® (mechanical spring struts) are designed for a long life while maintaining consistent, repeatable loads. m-Struts® are the ideal choice to replace conventional gas struts in difficult no-maintenance environments and wide temperature ranges.
Our range of m-Struts® (mechanical spring struts) includes standard m-Struts® with our without extension, and High Load m-Struts®.
Our standard type m-Struts® (Mechanically Powered Struts) function like conventional gas struts but without seals to fail or gas and oil that may leak.
This makes them ideal for no-maintenance applications and performance in extreme cold and hot temperature climates or near caustic gas and liquid chemicals. These struts offer robust compression
- Steel models have Nitride protection and have a black surface.
- Stainless steel models have a plain finish and offer greater corrosion protection.
End fittings are not attached to our m-Struts®. Please be sure to select the number of end fittings you need per cylinder.
m-Struts® Application
m-Struts® are suitable for soiled and dusty areas and in extremely cold, hot (400°F/205°C+) or humid temperature ranges as found in the medical, pharmaceutical or agricultural industry, for example, in cold chambers, medical lab equipment doors, or off-road equipment hoods and hatches. Further, as m-Struts® are used for motion control and dampening, they are suitable for emergency exits, lowering ramps, ground access hatches or roof access or dropdown hatches.