Torsion Springs
- Material for springs
- What tolerances do torsion springs have?
- What types of ends are provided for torsion springs?
- What material are Torsion Springs made of?
- Which installation instructions must be observed for Torsion Springs?
- How large should the shaft diameter for Torsion Springs be?
- Febrotec Search
- What is the smallest bending radius for Spring Steel Wire?
Part Number | Wire ø | Outer ø | Max. Torque | Max. Torsion | Max. Mandrel ø | Leg Length | Active Coils | Direction | Material Code | Stock | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
d | Da | Md | alpha | M/S | E | n | Available | ||||||
[mm] | [mm] | [Nmm] | [°] | [mm] | [mm] |
|
|||||||
0T063-090-343 | 1.6 | 14.22 | 475 | 38.8 | 8.71 | 50.8 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T063-090-343L | 1.6 | 14.22 | 475 | 38.8 | 8.71 | 50.8 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T051-090-234 | 1.3 | 10.36 | 328 | 44.1 | 5.94 | 50.8 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T051-090-234L | 1.3 | 10.36 | 328 | 44.1 | 5.94 | 50.8 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T054-090-296 | 1.37 | 12.29 | 370 | 48.6 | 7.52 | 50.8 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T054-090-296L | 1.37 | 12.29 | 370 | 48.6 | 7.52 | 50.8 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T015-090-062 | 0.38 | 2.79 | 10.51 | 51.4 | 1.57 | 12.7 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T015-090-062L | 0.38 | 2.79 | 10.51 | 51.4 | 1.57 | 12.7 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T105-090-500 | 2.67 | 21.54 | 2373 | 53.9 | 12.7 | 88.9 | 3.25 | 90° | 1.4310 |
|
Details | ||
0T105-090-500L | 2.67 | 21.54 | 2373 | 53.9 | 12.7 | 88.9 | 3.25 | 90° | 1.4310 |
|
Details | ||
0T035-090-187 | 0.89 | 8 | 113 | 54.2 | 4.75 | 31.75 | 2.25 | 90° | 1.4310 |
|
Details | ||
0T035-090-187L | 0.89 | 8 | 113 | 54.2 | 4.75 | 31.75 | 2.25 | 90° | 1.4310 |
|
Details |
Our torsion springs exert a force in the opposite direction of the applied force. These springs provide even tension, alongside smooth and frictionless motion and are frequently used in the automotive industry in vehicle suspension systems or different types of door hinges and in complex medical equipment like hospital beds.
Torsion Spring Types
- Standard – straight torsion ends
- Right-hand and left-hand wind
- Special end-positions are finished on request
Torsion Spring Material
- 1.4310 stainless steel
Torsion Spring Applications
- Door Hinges
- Mechanical Engineering
- Precision Engineering
- Consumer Goods
- Medical Equipment