m-Struts®
Part Number | Rod ø | Tube ø | Length | Stroke | Initial Force | Final Force | Material Code | Mounting Thread | Stock | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|
R | T | L | St | F1 | F2 | M | Available | |||||
[mm] | [mm] | [mm] | [mm] | [N] | [N] | [mm] |
|
|||||
0GS-MSE-051-0107-S | 10 | 22 | 170 | 51 | 36 | 107 | V4A | 8 |
|
Details | ||
0GS-MSE-101-0200 | 10 | 22 | 322 | 101 | 67 | 200 | Stahl/Steel | 8 |
|
Details | ||
0GS-MSE-101-0200-S | 10 | 22 | 322 | 101 | 67 | 200 | V4A | 8 |
|
Details | ||
0GS-MSE-153-0227 | 10 | 22 | 474 | 153 | 76 | 227 | Stahl/Steel | 8 |
|
Details | ||
0GS-MSE-153-0227-S | 10 | 22 | 474 | 153 | 76 | 227 | V4A | 8 |
|
Details | ||
0GS-MSE-203-0254 | 10 | 22 | 627 | 203 | 85 | 254 | Stahl/Steel | 8 |
|
Details | ||
0GS-MSE-203-0254-S | 10 | 22 | 627 | 203 | 85 | 254 | V4A | 8 |
|
Details | ||
0GS-MSE-254-0267 | 10 | 22 | 779 | 254 | 89 | 267 | Stahl/Steel | 8 |
|
Details | ||
0GS-MSE-254-0267-S | 10 | 22 | 779 | 254 | 89 | 267 | V4A | 8 |
|
Details | ||
0GS-MSE-305-0280 | 10 | 22 | 932 | 305 | 93 | 280 | Stahl/Steel | 8 |
|
Details | ||
0GS-MSE-305-0280-S | 10 | 22 | 932 | 305 | 93 | 280 | V4A | 8 |
|
Details | ||
0GS-MSCD-026-1057 | 12.7 | 31.75 | 188.98 | 25.4 | 782 | 1057 | V2A & Steel | 8 |
|
Details |
m-Struts®
Our m-Struts® (mechanical spring struts) are designed for a long life while maintaining consistent, repeatable loads. m-Struts® are the ideal choice to replace conventional gas struts in difficult no-maintenance environments and wide temperature ranges.
Our range of m-Struts® (mechanical spring struts) includes standard m-Struts® with our without extension, and High Load m-Struts®.
Our standard type m-Struts® (Mechanically Powered Struts) function like conventional gas struts but without seals to fail or gas and oil that may leak.
This makes them ideal for no-maintenance applications and performance in extreme cold and hot temperature climates or near caustic gas and liquid chemicals. These struts offer robust compression
- Steel models have Nitride protection and have a black surface.
- Stainless steel models have a plain finish and offer greater corrosion protection.
End fittings are not attached to our m-Struts®. Please be sure to select the number of end fittings you need per cylinder.
m-Struts® Application
m-Struts® are suitable for soiled and dusty areas and in extremely cold, hot (400°F/205°C+) or humid temperature ranges as found in the medical, pharmaceutical or agricultural industry, for example, in cold chambers, medical lab equipment doors, or off-road equipment hoods and hatches. Further, as m-Struts® are used for motion control and dampening, they are suitable for emergency exits, lowering ramps, ground access hatches or roof access or dropdown hatches.