Compression Springs
![Compression springs with schematic diagram • Wire diameter: 0.1 mm - 6.3 mm | Febrotec](temp/thumbnails/schraubendruckfeder_leisten-b4ab1.png)
- What expansion does a Compression Spring exhibit upon compression?
- What surfaces are provided for Compression Springs?
- What is the winding direction for Compression Springs?
- What is the service life of Compression Springs for a force F1?
- What are the outside diameter tolerances and spring rate tolerances for Compression Springs?
- Material for springs
- What happens when a Compression Spring is set?
- What is the spring rate or spring constant of a Compression Spring?
- What is the solid height of the Compression Spring?
- Febrotec Search
PartNumber | Outerø | Innerø | Wireø | Length |
Loaded Length![]() |
Force at L1 | Spring Rate | Block Length | Material Code | Ends | Stock | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Da | Di | d | L0 | L1 | F1 | c | Lc | Available | ||||||
[mm] | [mm] | [mm] | [mm] | [mm] | [N] | [N/mm] | [mm] |
|
||||||
0X-DF2633 | 21 | 13 | 4 | 505 | 316.82 | 1458.21 | 7.749 | 280 | 1.1200 | geschliffen / ground |
|
Details | ||
0X-RDF2633 | 21 | 13 | 4 | 505 | 316.82 | 1252.53 | 6.656 | 291.76 | 1.4310 | geschliffen / ground |
|
Details |
Compression Spring Dimensions
- Wire Diameter 0,1 mm – 6,3 mm
Compression Spring Materials
- EN 10270-1 patented drawn unalloyed spring steel wire
- EN 10270-3 stainless spring steel wire