Gas Struts with Welded Ends
- Febrotec Search
- What should I do if the Gas Strut has lost pressure?
- Would you like help from Febrotec for the design of gas springs for flaps or doors?
- Can I return a supplied Gas Strut if the pressure is insufficient?
- Where is the test force of a Gas Strut measured?
- How does a Gas Strut work?
- What are the differences between Gas struts, Gas Pressure Dampers and Nitrogen Cylinders in our Gas Strut series?
- What is the service life of Gas Struts?
- What is the maximum permissible ambient temperature for Gas Struts?
- Safety Data Sheet and Installation Instructions for Gas Struts
- Can Gas Struts be pressurized?
Part Number | Rod ø | Tube ø | Length | Stroke | Eye ø | Initial Force | Replacement | Stock | |||
---|---|---|---|---|---|---|---|---|---|---|---|
R | T | L | St | B | F1 | Available | |||||
[mm] | [mm] | [mm] | [mm] | [mm] | [N] |
|
|||||
0GS-W10HAP0750 | 10 | 22 | 340 | 130 | 8.1 | 750 |
|
Details | |||
0GS-W10HAP0800 | 10 | 22 | 340 | 130 | 8.1 | 800 |
|
Details | |||
0GS-W10HAP0850 | 10 | 22 | 340 | 130 | 8.1 | 850 |
|
Details | |||
0GS-W10HAP0900 | 10 | 22 | 340 | 130 | 8.1 | 900 |
|
Details | |||
0GS-W10HAP0950 | 10 | 22 | 340 | 130 | 8.1 | 950 |
|
Details | |||
0GS-W10HAP1000 | 10 | 22 | 340 | 130 | 8.1 | 1000 |
|
Details | |||
0GS-W10HAP1050 | 10 | 22 | 340 | 130 | 8.1 | 1050 |
|
Details | |||
0GS-W10HAP1100 | 10 | 22 | 340 | 130 | 8.1 | 1100 |
|
Details | |||
0GS-W10HAP1150 | 10 | 22 | 340 | 130 | 8.1 | 1150 |
|
Details | |||
0GS-W10HAP1200 | 10 | 22 | 340 | 130 | 8.1 | 1200 |
|
Details | |||
0GS-W10JBV0150 | 10 | 22 | 385 | 145 | 8.1 | 150 |
|
Details | |||
0GS-W10JBV0200 | 10 | 22 | 385 | 145 | 8.1 | 200 |
|
Details |
Our gas struts with welded ends are ready for use without additional end pieces.
Gas Strut Applications
- Furniture Industry
- Automotive