Gas Struts with Welded Ends
- Febrotec Search
- What should I do if the Gas Strut has lost pressure?
- Would you like help from Febrotec for the design of gas springs for flaps or doors?
- Can I return a supplied Gas Strut if the pressure is insufficient?
- Where is the test force of a Gas Strut measured?
- How does a Gas Strut work?
- What are the differences between Gas struts, Gas Pressure Dampers and Nitrogen Cylinders in our Gas Strut series?
- What is the service life of Gas Struts?
- What is the maximum permissible ambient temperature for Gas Struts?
- Safety Data Sheet and Installation Instructions for Gas Struts
- Can Gas Struts be pressurized?
Part Number | Rod ø | Tube ø | Length | Stroke | Eye ø | Initial Force | Replacement | Stock | |||
---|---|---|---|---|---|---|---|---|---|---|---|
R | T | L | St | B | F1 | Available | |||||
[mm] | [mm] | [mm] | [mm] | [mm] | [N] |
|
|||||
0GS-W10PCA1150 | 10 | 22 | 586 | 245 | 8.1 | 1150 | Lift-O-Mat 095028 |
|
Details | ||
0GS-W10RCB1150 | 10 | 22 | 685 | 295 | 8.1 | 1150 | Lift-O-Mat 097306 |
|
Details | ||
0GS-W10SCC1150 | 10 | 22 | 785 | 345 | 8.1 | 1150 |
|
Details | |||
0GS-W10TCD1150 | 10 | 22 | 885 | 395 | 8.1 | 1150 |
|
Details | |||
0GS-W10WBU1150 | 10 | 22 | 286 | 95 | 8.1 | 1150 | Lift-O-Mat 094986 |
|
Details | ||
0GS-W10HAP1200 | 10 | 22 | 340 | 130 | 8.1 | 1200 |
|
Details | |||
0GS-W10JBV1200 | 10 | 22 | 385 | 145 | 8.1 | 1200 |
|
Details | |||
0GS-W10NBY1200 | 10 | 22 | 486 | 195 | 8.1 | 1200 |
|
Details | |||
0GS-W10PCA1200 | 10 | 22 | 586 | 245 | 8.1 | 1200 |
|
Details | |||
0GS-W10RCB1200 | 10 | 22 | 685 | 295 | 8.1 | 1200 |
|
Details | |||
0GS-W10SCC1200 | 10 | 22 | 785 | 345 | 8.1 | 1200 |
|
Details | |||
0GS-W10TCD1200 | 10 | 22 | 885 | 395 | 8.1 | 1200 |
|
Details |
Our gas struts with welded ends are ready for use without additional end pieces.
Gas Strut Applications
- Furniture Industry
- Automotive